Yamaha YZF-R1, Type RN22, 2009>

Shock absorber:

- Part numbers 640/643-943-00

- Shock types 640 and 643QSH37 possible.

- 625 only possible with 643 shock absorber as the adjuster knob is mounted directly to the compression tank.

Ride Height  possible.

- Highering possible for max. 30 mm.

- Lowering possible for max. 30 mm.

Fork:

- Fork springs standard height 601-272 with fork oil viscosity 5 and 110 mm air chamber.

- Fork springs for lowering 30 mm 601-294- oil viscosity 5, air chamber 90 mm incl. fork lowering valves.

Lowering is only possible with both shock absorber and fork spring kit!

Ducati Monster 1100 Type M5 2009>

Shock absorber:

- 640/641-948-00 possible.

Hydraulic pe-Load possible.

Ride height possible.

- Raising seating height maximum 10 mm.

- Lowering maximum 40 mm.

- When lowering no Hydraulic and R/H possible!

Fork:

- Standard progressive fork springs 600-273 oil viscosity 10, air chamber 120 mm.

- Standard linear fork springs 601-208 spring rate 8.3N/mm oil 10 air chamber 110 mm.

- Linear fork springs for lowering 601-294 spring rate 9.5N/mm oil viscosity 10 air chamber 100 mm and fork springs include lowering valves.

Lowering for 40 mm is only possible with lowering fork spring kit!

Harley Davidson Street Rod VRSCR, 06-07, Typ VR2

Shock absorber:

- Part number TS 640/642-936-00.

- Shock types: 640 TS and 642 TS.

- 625 Hydraulic Pre-load not tested because preload is reachable with spanner tool.

- 629 Ride Height possible.

- Highering vehicle max. + 15 mm.

- Lowering vehicle for max. - 50 mm (Flat Rod).

- With lowering 629 not possible.

Fork:

- USD fork.

- Fork springs 600-208 with fork oil viscosity 7.5 SAE and air chamber 110 mm.

- With lowering 50 mm fork springs 600-208 incl. lowering cartridge valves, fork oil viscosity 7.5 SAE, air chamber 90 mm.

- 2 litres of fork oil necessary.

Shock absorber for lowering only in connection with the respective fork spring lowering kit because the fork cannot be pushed through the Yokes!

Buell 1125 R, 2008> Type XB 3

Shock absorber:

- Part number TS 630/631-931-00, Ecoline 530-609-00.

- Shock types: 630 and 631 possible.

- 625 Hydraulic Pre-load possible.

- 629 Ride Height not possible.

- Highering vehicle for max. + 10 mm.

- Lowering vehicle not possible due to limited stroke.

- PA (preload adjuster) recommendable preload not adjustable with spanner tool.

Fork:

- USD fork.

- Fork springs 600-373-00 with fork oil viscosity 7.5 SAE and air chamber 140 mm. The fork spring is a new construction.

- With lowering fork springs 600-325 incl. preload valve and lowering valve, fork oil viscosity 5 SAE, air

Beta Motard 4.0, 2007>, Type T2

Shock absorber:

- Part number 630-933-00, Ecoline 530-613-00.

- Shock types: only 630 possible, 631, 632, 633 not possible.

- 625 Hydraulic Pre-load not tested.

- 629 Ride Height possible but only with limited stroke.

- Highering vehicle not possible.

- Lowering vehicle for max. – 70 mm

- With lowering 629 not possible.

Fork:

- RSU twin-tube fork.

- Fork springs 600-325 with 85 mm preload valve, fork oil viscosity 5 SAE and air chamber 160 mm.

- With lowering fork springs 600-325 incl. preload valve and lowering valve, fork oil viscosity 5 SAE, air chamber 140 mm.

Shock absorber for lowering only in connection with the respective fork spring lowering kit!